3D Stickers

3D domed stickers have a clear appearance with an extra protective layer of synthetic resin thanks to doming, making the product scratch- and wear-resistant.

• Front printed in four colours, back unprinted (4/0)
• with a clear appearance and an extra protective layer of synthetic resin due to doming
• scratch and wear resistant
• long lifespan thanks to protective layer; print does not fade even with frequent UV radiation
• particularly suitable for surfaces that are difficult to stick on, such as PE or PP
• Note: The surface to be covered must be free of dust and grease and must not contain any contaminants that could adversely affect the material's adhesive strength. New coats of paint must be dry and fully cured.

• Data format (incl. 2 mm bleed): 4.9 x 4.9 cm
• Final size: 4.5 x 4.5 cm
• Special considerations when formatting a file:
• The following must be observed for transparent stickers/films:
• white elements cannot be printed
• the lighter the printing ink, the more transparent the foil looks
• the foil is not printed in mirror image (self-adhesive part on the back of the motif)
• when a motif is glued to the inside of a glass surface and is to be viewed from the outside, the print data must be created mirrored
• Resolution: 300 dpi
• Allow 2 mm bleed around, important information with at least 3 mm distance from the final format
• Fonts must be fully embedded or converted to curves
• Color mode: CMYK, FOGRA51 (PSO Coated v3) for coated paper, FOGRA52 (PSO Uncoated v3 FOGRA52) for uncoated paper
• We do not check spelling and typographical errors
• Overpressure settings are not checked by us
• Comments will be deleted and not printed
• Contents of form fields are also printed

They are certainly suitable for outdoor use, provided the surface is grease-free and even. They have a long lifespan thanks to their protective layer; the print won't fade even with frequent UV exposure.